Separate names with a comma.
@Birdie. Yes I tried it on the positive of the battery and it light up, I can explain it right now because it has a ground wire on the light. It...
Hope this helps
So did a little more troubleshooting, found a wiring diagram for the post 2001 bikes, one wire neutral switch. It's correct that the switch is...
As far as I know: -998 shallow sump 123hp -998s deep sump, sand cast, carbon belly, ohlins rear shock 136hp -998s Baylis/bostrom same a S...
Here you go: Home - Bee & Gee Auto's Almelo For sale for quite sometime, so maybe negotiable.
What number does it carry?
Red, thx. The washer is there, also tried it without the washer, to be sure it is in contact with the drum. No success. My loom has only the one...
I'm confused, new switch and no results.... The wire that's going into the crankcase, does it have 12volt originally? Or is it switching on the...
So my neutral light has a problem, it never worked by the way since I bought it, it's the one cable version Checked so far: Fuses, oke Light...
Marc veld like the owner of Multi-brand dealer van BENELLI, BIMOTA, MOTO MORINI en mede gespecialiseerd in APRILIA DUCATI en KTM.
Very very weird people around here. From the hyper..... [IMG]
Wd40 and a tooth brush. :)
FIXED!! Fuel line between pump and filter was disconnected. Strange though as I only removed the tank. Anyway thx for the much appreciated help!!!
Can I test the fuel line with just the black installed and crank the bike, there should come fuel from the return one....
Thx for the response, the o'rings are good, and the pipe connects fully home. It's a real pain in the ass. Will check the lines in the fuel tank...
Correct blk is feed White is return. Will check the lines inside tonight, could they going loose with just a removal and storage??
Thanks for reading and answering Red. Well its not starvation, but no fuel at all. The feedline is completely dry and the injectors are pumping...
Hi guys, Last week a had the last run with the bike. It needed a bit of tlc, so after a week the bike wouldn't start anymore. To rule out a...
Well, all the original bolts are replated, at least I thought. After a day of fiddling I found some more :) and only need the brake calliper...
Needed for my 748R resto: Brake caliper p4 34/34 bolts to attach to the fork 4X Rear wheel nuts left and right Rear sprocket carrier nuts Rear...
