Separate names with a comma.
I can send you the workshop manual. Pm me your email. I think desmowerx on YouTube have some good videos on how to measure clearance.
Are we sure this is not just normal? Both my cylinders looks like that and I haven't experienced any running issues. Other than my r/r burning up...
So status update. The engine is out. I'm thinking there is something wrong with the transmission so I will open it up and renew everything....
Thank you all. I'll keep posting my progress here.
Thank you. Tried that as well. The fork is in the center. Even though i roll the rear wheel same issue occurs. It's like something inside is...
The ending up between gears is a new thing. The bike have never done that before. That's why I disassemble it in the first place. So the work on...
I think it would be the same as before. When I rode it before disassembly there where no issues. I only got between gears when standing still....
[MEDIA]
Finally got the parts and some time to work at my 1098. Happy Days. What follows not so much. I have refreshed all the part except the back...
Still waiting on parts. Ordered new shift fork with all hardware and also new belts etc while it's down. Report back once I get the parts. Thanks...
Thank you all. I'll be with my bike tomorrow and give it a go. I'll report back.
Thank you both. Be the gap, do you mean the gear selector fork should be visible from behind the flywheel? Do I need the tool to adjust the set...
Bike is at 41 000 km, had it since about 15 000 km. Zero track days since I had it. Pretty well taken care of before it ended up in a living room...
Thank you Chris and Sev. I already have the manual since many years ago but this version were much better. I never had the frame tourqe spec so...
Thank you very much for your help Chris.
The big 25nm bolt were ok. The small 10nm bolt were loose. How does one adjust/tighten the set screw? I did not touch that since I didn't know...
Finally, if needed. This tool should work for removing both inner and outer basket?...
Should fork be this loose? [MEDIA]
This I think is normal noise when in neutral [MEDIA]
Thank you all for the response and help. I had some time to investigate. I have zero metal shavings in oil. Oil plug magnet like new. I'm sure...
