Separate names with a comma.
Hi Mine was a 900 and removal of the primary gear was done so I could strip everything out and clean up the cases properly prior to paint. You...
Hi, just done the some work on my 900ss engine, and your plug is definitely backing out. If you can get a small screwdriver or similar onto the...
Cold slightly damp air gives a noticeable power boost, it’s all down to the density of the air, the low temperature means more oxygen in a given...
Might be worthwhile checking the emulsion tubes as they will go oval with use and give you all sorts of running issues The keyster kits are really...
Hi all Although I’ve used this site before it was a long time ago so I seem to be loading as a new member So hello all
Hi If you fit an aluminium basket you can fit Suzuki gs/gsx range friction plates as their ally and a perfect fit for less than half the price,...
Hi The standard air box will not fit with a welded cross brace, I have the removable one fitted and have to remove it in order to lower the air...
That evocative aroma that once smelt is never forgotten CASTROL R
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi Ed, if you still have your carbs off the bike you should be able to check for any blockage in the...
Before you start this strip down run a jump lead from your battery positive direct to the starter motor connection and if nothing happens then...
Hi jack the starter is reasonably straightforward to remove. first disconnect or remove your battery then disconnect starter power cable, you will...
Hi it’ll be the starter motor brushes, you can get them from electrux world or you can go the whole hog and get a replacement starter from the...
Hi There is a multipin connector for the rear tailight loom,its located under the seat next to the mudguard mounting point. check that this is...
Had an Oberon on my 900ss for over 8 years and have not had any problems with it, it does have a slightly easier lever action and stops any...
Sounds like a great winter project, the studs should be the only real issue, but a good machine/engine shop should sort that. If you do go ahead i...
got a set of coils and leads if you want to try them, these are the standard coils from my bike,i upgraded them a couple of years ago. fergus
Hi Billy Have you checked for air leaks on the inlet stubs , are the balance blanking screws still there ? are the carbs balanced, if you need...
Thanks for that Andy. i was confused by the :K: AND :D: end designations
Hi all, About to replace my front tyre, Diablo rosso 11 (120/70ZR17) Oponeo list two, one at £74 and one at £76, Does anyone know if there is...
