Separate names with a comma.
No problem, happy to help, good luck and hope it's an easy fix.
Just a note on the radiator, only one fixing at the top is a bolt, the other side is just a pin that the radiator grommet slides on and off. Hope...
Make sure you use sealer on both sides of the rubber cam cover gasket and if it's misshaped in the packaging, sit it next to a fan heater to warm...
Hi, no wasn't me. Took bike off the road for winter maintenance at the start of October, back out in the spring
Welcome!! Dare say we'll bump into each other at Helmsley at least
Not really, he wasn't killed so no party!!
If I wanted to buy a bike I would do anything to secure the sale. I wouldn't expect you, as a private seller, to jump through hoops to sell it to...
Hi Phil, I got some aluminium plate and made my own. I knew that the timing was spot on so made a pair of tools to hold the cams before I started...
Welcome aboard! There's an answer to everything on here so you'll never be stuck
Good luck, hopefully they'll sort it for you
Hi, did you get to the bottom of your oil leak? Craig.
Hi, I'd recommend Damien at Daytuner Performance near Harrogate. He did the ECU mapping on my 2006 999 which I converted to 1038 with a kamna kit....
Hi all, I did some in-frame engine work on my 999 and swung the battery box out of the way. This put a little pressure on the alternator wiring...
If you pull the clutch lever in and can spin the pressure plate by hand then that's disengaging and if there's no slip when driving then that...
Welcome Stan, Anything you need just ask, someone will always have the right answer for you!! Craig
Mmmmm, perhaps not.
I have been using CCW belts on my 999 since I bought it in 2015 without issue. The last ones I fitted had only done a couple of runs on a Dyno and...
Welcome aboard! Any problems just ask, the forum is full of answers.
Looked on the site last week and apparently the technician is still available to work on your bikes if that helps anyone out there.
Welcome EnBeeDee, Welcome my friend, you can throw Google away now, the guys and girls on here have far more useful information to hand! Craig.
