Separate names with a comma.
Here's my effort of securing the brake cable: I used a similar well made clip of[ATTACH] zinc steel from a citroen Xantia - one of the six or so...
It's all good condition. The boss lifted easily with a sharp chisel, although it wouldn't budge to turn. Discovered just a little oxidation,...
Thanks friend. I desired this gentle advice before I got to further grips. wasn't sure of the precise manner of its engagement with worm drive and...
I have taco drive boss (ducati 600ss '97) to remove from engine in order to clean the tacho cable retaining thread of superglue. Having removed...
Tried orange canvas over my head from an old tent - didn't do the trick - a dark blanket would have been better. I do have a brown camel blanket...
Mine fits well but I have to poke it in all the way to the hilt.
I just peeped up into the throttle cam link area in this twilight, and spotted it straight away with a torch - a shaded area is good then, if you...
@WAH900ss what a good idea here; pity I missed the opportunity earlier. @Arquebus. your description sounds useful here... cheers for that: I guess...
Attempting to synchronise carbs on bike running on side stand, a Ducati 600ss; I find it difficult to see the carb sync acres and so get a...
OK gotcha Pete. Thanks. I've been through the process, and can report no binding. I found the closer spring to work well, and now have avery very...
Surely I only need to gently rock the camshaft around TDC to check for bind, i.e. when the closer is on the cam. The head is surely internally...
Ta, I find I like this compliment, when I adventure into good, tricky or skilful things with care and so on, much like my young son does! Whats...
Because I'm on other work... !! Bear with me. I'll report back. However, before asking here I did not know it was the definitive test in the...
Yep that's true. Mainly, what I was checking was the meaning of the observation that the closer rocker spring would not depress, in order to...
Hmm.. at TDC that would be, tight before, during and after.. a lack of relief with no gap.... well optimistically speaking, perhaps if I took a...
Thanks, yes came across that method, and worthwhile it is. Observation here I have described is that pressing down on horizontal exhaust closer...
I must do that, yes, thanks Samurai ! I'd forgotten to mention it.. or even think of it in my summary at this point... its in my notes... next...
THat's a very good point to consider Pete.. You know, I've decided to run bike on road for a couple of hundred or so before I may do anything...
Excellent. Thanks Derek. I'll make sure I have some gap - off to get a new set of feelers now. I had been wary, that perhaps the valve is sitting...
Oh yes, that's a good point , something which I practise. I'll need to go down to a smaller gauge first, to see if I can attempt that. I do wonder...
