Separate names with a comma.
Is this the 25mm axle you want?
Jeez, is that you in the speed wing??
I would strip down the master cylinder and give it a really good clean out (sounds like something is blocked in it) You’ll probably find the seals...
Cheers for the replies
Thanks for the reply. That’s what I an doing is ordering a few in the size range.
Does anyone know what size these o rings are? Cheers.
I’m after a really good original screen for a 92-98 Carby SS Cheers..
Yes I have one, repainting the top fairing, I got the paint code off the Duc colour chart that’s on the net but that’s not the right silver, (had...
Does anyone happen to have a colour code to match the silver? Thanks in advance..
When I’ve shimmed my Duc gearboxes they’ve only been slightly out of tolerance and already have shims/thrust spacers on both sides and the ends...
Yes same dimensions 4x7.5x7.5
I have a restrictor on the bench in the garage as just doing my fuel lines, I’ll post the measurements tomorrow, just looks like a little brass olive.
Hi Chris, Did you see the pm I sent you?
Anybody have a pair of dynojet main jets 150 for the Mikuni carbs they no longer want? Cheers
That is an original shocker, maybe a previous owner was a featherweight or the opposite so changed the spring to suit :upyeah:
Watch out for the £600 minimum buyers fee on the collecting cars site! :eek:
Hey, I don’t know the stator resistance but do a simple check of the reg/ rec by testing the diodes across the yellow wires and if they’re dead...
Yes, make sure the holes you see at the bottom of the reservoir are nice n clear
It’s in the master cylinder, strip master cylinder and give it a jolly good clean out :upyeah:
