Separate names with a comma.
Garage clean day so they are all outside.... here is the line-up. My wife has said she is going to book me in for therapy soon... [img]
Its probably going to be the Guzzi and one of the Ducati's that go... I will pop them on Ebay soon as I am back from holiday [img] [img]
Don't worry, its all OK Well... apart from a final shake down and tighten, its finished. I am ahead of time this year as a lot of February...
well it didn’t start first time unfortunately… I hooked up the software and it showed some error codes, but they could have been there from before...
me too! i left it as it was as I felt I couldn't improve on it! I looked for ages to find some indicators that I liked… cheap ones were plastic,...
while I have retained the speed sensor for the ECU, the new clocks require a different one. I managed to drill and tap the calliper bracket and...
I cant disagree with anything you say Jon! I didn’t like the look of the original master cylinder so I have swapped it out for a radial one… Its...
its still 2 V! The extra output is down to the reworked heads, cams, exhaust and Ignition. Originally this Buell would have been around 94 BHP...
I agree it has that "begs to be ridden look" as that's what I have done all summer! Actually to the expense of my other bikes! It definitely has...
A bit more done on the wiring… I have also made a belt/pulley cover and a retainer for the main shaft nut which i will drill and slot when the nut...
Not many updates to report... Garage time is limited as my brother is seriously ill and that's taking a lot of my time... Just the odd few hours...
I made some headlight mountings that worked off the stanchions… but despite putting a lot of effort into making them, they just didn’t look right....
Last update for a while so we can get some winter sun! The bike ran when I got it, but as it had stood 10 years I decided to replace the fuel...
This was a time consuming and fiddly job… I have used air dry Cerakote a few times now, but on this one I decided to try the H series oven cure...
Next job has been replacing the fork seals and dust covers. Not a bad job to do, just needed to make a couple of tools, one to compress the spring...
When I bought the tube framed version the middle of last year, I did wonder how I would get on with it... Well, its been the bike of choice all...
thank you! I couldn't resist popping the frame on and a few bits to see how it looked [ATTACH] [img]
While the plater does a great job, there are still some items I prefer to do myself with one of the plating kits. Wheel spindles and oil pipes...
Engine build is finished... Not a bad engine to build when you compare it to a Ducati! I wanted to mount the exhaust underneath as per the...
I always tend to have some around! I hate putting stuff out… in particular powder coating. I have had some SHOCKING jobs come back over the...
