Separate names with a comma.
some more pictures... the seat came back from the trimmers, I was very pleased with the results, and its comfortable for me which is the...
I will probably leave them silver as thats the colour the frame will probably end up....
been a little while as I am having to take a break to do some house DIY… but I managed to sneak in the garage and make a cover for the front of...
jobs for today has been to put the seat foam on the aluminium tray and sand it to shape before sending it off to the trimmer. I was able to sit...
been busy the last few days making the speedo housing and mounting the headlight. I am using one of the digital rev counter and speedo's. this...
I know what you mean, and in many ways agree! I have spent ages looking at the seat, and in the early stages I did several designs in the foam......
there has been a bit more progress over the last few days...I have mounted the battery under the tank, and put the coils and solenoid on the...
a little bit more progress, been away a few days so not too much! the seat is more or less finished and is placed on the bike. I turned my...
early on while i was thinking about how I wanted the bike to look, I had a vision of a bit “Old Skhool” and decided I wanted a round headlight,...
I have finished tacking up the rear now and finally pleased with the result. Decided on rose joints rather than the home made ones... the frame...
One of the reasons I got the tank cheap on Ebay was it had been welded on a seam in the past… it was a poor repair using MIG and had leaked, so I...
A bit more progress... I have decided to go for pod filters, took the easy option! I have finished the the tank blanking plate, save for putting...
yes, I have been using Esso super which according to their web site has no ethanol in the midlands... But its short term, they are going to start...
yes, that's a fear... I have rubber mounted the carbs and will also support them in some way. I also intend to brace the two manifolds together...
not sure is the answer... but they are roughly the same length where I have mounted the carbs...
Last winter I built a Multistrada special out of an accident damaged 1000DS. I finished it in April and I have ridden the bike all summer… I...
[ATTACH]
I started the project last year and finished it in April and rode it all summer. But I hate the plastic tank and all the electronics so I am...
[ATTACH] [ATTACH] [ATTACH]
Ducati St tank and seat parts wanted I am converting a Multistrada to an ST tank and seat and need the following parts The rubber buffers that...
