Separate names with a comma.
Cooky, Should be a link to the filter in this post. 750SS project begins 750SS project begins | Page 2 | Ducati Forum Cheers Gaz
richgilb, [ATTACH] Carby 900SS. Not sure if this is Standard but it was how I got it and it will be going back like this. Cheers Gaz. EDIT:-...
I have a small bum bag made out of an elephants foreskin, but if I rub it, it turns into an overnight bag. Cheers Gaz
Hope this is some help. http://www.toyota-tech.eu/wire_harness_rm/RM06H0E.pdf I spent the best part of the weekend putting in some tow bar...
Adecarcer, Whatever size it is I believe you need the correct grade for fully submerging in fuel "R10". See below - I got this from somewhere....
Steve, Many thanks for reply. I have chosen the "time sert" bushes. I believe the helicoil and time-serts bushes are the same thread on the OD -...
Phil, You can pick our brains but don't pick our noses, hello. Cheers Gaz
AL, PS......No dissing intended, but I reckon you are thinking about it too much...... - No problem AL I know my faults, That's why I pointed...
AL, Thanks for your reply, I can see you understand the point about the outer race dragging behind or being pushed ahead of the inner race. I did...
AL, I understand your explanation which is once again comprehensive, thanks But, I am still not clear on positoning the pulley side bearing....
That did cross my mind. Anyway what about this. I have been going down the path of pressing bearing in on "outer" as thats where it's located....
Sorry your are correct AL - tacho drive. Ok the diagram is a 907ie, it shows the gear the wrong side of the outer bearing for the 900ss set up,...
All, Putting above mentioned cam bearings and speedo drive worm gear back together. The gear goes between the inner (SKF 6004 C3) and outer (SKF...
I would go plain white and then stick on whatever number you want depending on how you feel. You could have one for every day of the week....
Rob, Couple of posts on here. Mikuni service kit | Ducati Forum Carby Strip Down | Ducati Forum Cheers Gaz
rob6539, I was / am in the same position. I bought something like the following. M6 x 25 Qty:4 A2 Stainless Hexagon Flange Setscrew Hex Flange...
Kurt, Good, that's OK then. Cheers Gaz
KG900SL, Could others confirm, thought head nuts were 3 stage torque 15 / 24 / 41Nm. Where did 20/30 Nm come from? Cheers Gaz.
Ahhh Neutral Bay Hotel, that brings back faded memories - nice bike. Cheers Gaz
KG, Please ref pictures for old & new studs, silver ones are the old ones. I have added 3 more bolt to picture A, B & C, can't remember what they...
