Separate names with a comma.
I don't know how to identify them but I do have a rev counter from a 916 Strada, so suitable for the P8 ECU which I'm willing to sell.
The regulator is bomb proof. Why exactly do you think the trouble starting is injector related? Did you set up/balance your throttle bodies and...
Disconnect the coils or pull the spark plug leads. Then you'll have fuel spray but no start.
Stick two M3x6 cap heads in the holes either side. That gives you something to grip onto. Lubricate, twist and pull.[ATTACH][ATTACH] [ATTACH]
You can power the injector with a 9V battery or any other source of 9-12V. It opens the path so you can back flush them with a can of brake...
I use these for my fork tops. [ATTACH] The jaws are smooth and they move parallel to each other. They also have a finely incremented adjustment...
I've upgraded my monster to LED bulbs. It was pretty straight forward. I needed a h7 and a H1 bulb and they couldn't be longer than the standard...
6000 to 1 is rather good odds compared to the lottery for example: 45,057,474 to 1 (Lotto) 139,838,160 to 1 (EuroMillions) 15,339,390 to 1 (Set...
Öhlins spares are easier to come by but very expensive. I recommend Ben at BG bearings. He's been a Öhlins franchise dealer for many years.
Firstly, I don't know why there are suggestions to take out the swing arm pivot bolt? Also hex sockets won't work on the Allen head bolts that...
I have a bigger one of theirs. I use it most days. It gets covered in cutting fluid at times as I use it when machining stuff. I can't fault it....
A mitutoyo caliper for £30 is definitely fake. If you want quality at a bugdet I can recommend Shahe. They are Chinese but excellent quality.
Yes, with the rear slackened you should be able to slide the front sprocket off the shaft. I did it with a brand new chain. Took a bit of wiggling...
Would you even need to split the chain to change the front sprocket. I did it on a monster 696. No splitting of chain needed to go from 15 to 14...
I would measure the static and rider sag with what you have. As a ballpark, set your static sag to 10mm by adding or reducing preload. then sit on...
They can be difficult to get going. I have a cheap Chinese vacuum bleeder that hooks up to a compressor. Sucks the fluid through from the bleed...
Hi all, I have fitted a Rapidbike Evo to my Monster 696. It feels like it's actually working very well but it throws up an error. EML comes on...
Oh you do need to brim it. If you don't the acid vapour from the vinegar will make the exposed metal go rusty. You can dilute it a bit with water,...
I made this puller and it didn't work for me at all. I actually made parts off it from much thicker steel and it still bent like a banana. A...
Mine had gaskets when new but I have long removed them and use three bond. The 0.2 mm more or less makes near enough no difference on the clutch...
