Separate names with a comma.
Open them up and solder in replacement bulbs [IMG] Or convert them to LED.
According to the wiring diagram, fuse 1 of the same fuse b(ox), marked "Optional key" is 7.5A and supplies a connector for optional heated grips....
I've had it in my Superport for 2 years with no issues.
[IMG] Heatshrink works good :) [IMG]
I fitted LED indicators to my previous 2010 Multi, my 2015 Scrambler and my 2017 Supersport, none of which needed resistors. I be very surprised...
Well! You learn something every day. That's some beard the guy has too :astonished:
Yes, switching the bike to ON will definitely blow the meter fuse, certainly on the low current >2A range. It would possibly blow the fuse for...
True, but it could be anywhere on the bike that is drawing the current. It is the main fuse.
Are you aware that the 30A fuse at the starter solenoid is not for the solenoid itself but is the main fuse for the whole bike?
I've tried replacing the brushes with the starter in situ. It's far easier to take the starter off.
I think the MC3 software from JPdiag should do the trick. Check his forum for its use and the appropriate cables.
I think you might need something like these https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F232610192709
You can download it from my dropbox https://www.dropbox.com/s/no0kwbv17x6srlo/996.pdf?dl=0
If not can it take a signal from one of the coil outputs of the ECU?
Very sorry to hear this. I hope Denzil makes a good recovery.
Yes, there is often a microswitch positioned so that it is triggered if the seat is lifted. It goes straight to the alarm wiring though and...
I 've removed many Datatool alarms but I have no idea what each wire does, as you know they are all black. If I had the time I could trace them...
Yes, that's them. I also had a minor off last year but the damage to the bike, 3 fairing panels, a ding in the tank, mirror, bar end, rider...
Good tips there. More info on what to look for in data packets would be useful. The speed sensors are 2 wire and I believe they are hall-effect...
They are Evo-Tech. I chose them because they fit to the engine mounting points and don't clamp to the frame.
