Separate names with a comma.
Looks like you have the raw materials to make a guard. They are attached to the front of your daughters bike in the background.
I’m not a social sort of bloke, so the saved contacts I have on my mobile are mainly work contacts and companies, including Snells, MotoRapido,...
No camping fridge, a proper plug in domestic one @3/4 normal size meant for smaller kitchens. The fridge, lighting etc was all about making the...
Camping was a completely different experience for us. We do have a couple of small 2/3 man tents which have been used on beaches a few times if...
It would appear so, apart from the belt itself. The head of the valve is bent over and out of true by @ 0.65mm. Posts #38 & 39...
It depends on how loose and flakey it is really. It will soon clog everything up and restrict fuel flow if it's loose.
It looks like some sort of tank sealer to me. Depending on what Epoxy it's based on you'll need to dissolve it. Tank sealants are great, until...
Anyone got a spare exhaust valve for a 1000DS engine hanging around? I think the 1100 Air cooled 2 valve engine may use the same Valve. Measures...
Can you select any gears higher than 2nd if you physically pull the selector arm towards you or away from you whilst moving the gear lever? Also,...
I extended the wiring to the Fuel pump relay socket on my 999 right up so it's just inside the upper fairing panel. I can now change it just by...
It looks clean, not original in several ways if that's your bag, and does look like the frame has been painted to me, it looks a little too...
Have you checked one of the pins in the rivet link isn't sticking out a bit further than it should be?
In the image of your bike it looks like the locknut on the actuator arm is hitting the sidestand bracket, but that could just be the angle the...
Sorry Indiecourier, as I thought, both studs have sheared off through the rubber part: [ATTACH] [ATTACH] It's in otherwise very good...
The stem of the valve is perfectly straight, but the head is canted over slightly. I put it in my lathe with a dial gauge and spun the chuck by...
I pulled the head today to see what the damage is. There is a definite mark across the straight edge of the Exhaust valve cut-out in the top of...
I've got one I'd be willing to part with for a reasonable sum, but it might have the mounting studs sheared off the back at the rubber bit. I'll...
I've got one somewhere, send me a Message to remind me to have a look, otherwise I'll forget.
Can't justify it Andy, just felt very small, but I think it was possibly just narrow having just got off my 999 where my knees are outside the...
Didn't ride it, but sat on one at Snells the other day, they had 3 on site altogether. Felt quite small to me, that's my only comment. The sales...
