Separate names with a comma.
Before taking the belts off make your own marks. Centre punch a dot on each cam pulley in an appropriate place. Make marks against them on the...
I've never had a need to put marks on belts - but then I seem to have a better understanding of how it works ;)
Well, yes but you shouldn't be turning the engine at all to fit belts. The belts should be fitted with the engine at the 'timing position' - Horiz...
Only if it's a 2 stroke :D Remember Jeremy that a 4 stroke engine needs 2 complete revolutions to return to the same point in the firing cycle.
Yes, but at the top of the exhaust stroke and both valves will be partially open. I never turn the engine backwards because it transfers the...
The lower pulley mark and the slot on the cover only line up when the horizontal cylinder is at TDC at the start of the firing stroke. Remember...
It hasn't got a relay. But yes, if the front indicators are not connected the dash will flash the rear ones at double speed as a warning.
Not that I know of. Ducati will probably suggest a new dash! It is possible that the earth circuit for the front flashers is broken which would...
The indicators on this bike are driven directly from the dash.
No more than 10Nm. It can't fall out anyway because of the retaining clip
I like the rest of the bike but dislike the graphics.
Check for a parasitic drain. Do this by connecting a meter set to read 200mA between the battery -ve and the ground connector. DO NOT switch the...
I would appreciate that. I can see that they are still available from Stein Dinse but at a hell of a price!
The one way valve that fits on the tube from the tank vent. Like this [ATTACH]
Indeed. I've heard of some folks waiting 3 or 4 months to get their bikes back.
Delivery was promised. It's a 200 mile round trip for me involving 3 bus journeys to get there, so I hope so.
I had a call from the dealer today, they want to pick up their loan bike. I don't mind that as I have a Scrambler Classic already and with the...
I'm on the look out for a fuel tank breather from one of the carbed SS models for a friend who is restoring a '94 900SS. Anyone got a spare or...
All the 6 hole Ducati discs should have a 10mm offset except for those from "R" models which are 15mm
From the ST4 parts list for European models : [ATTACH]
