Separate names with a comma.
I replaced the OEM Regina chain on my 1260 at 12k miles with a DID X Ring ZVM chain, also changed the front sprocket, 1 tooth less. big...
Yes they will, think the discs may be a different diameter though!
Agree that's certainly the easiest way to unblock it, just a shame it gets blocked up again so quickly :(. I use a pet hair dryer to blast out...
Interesting thread, being as I've just finished packing the bike, 2 panniers and top box + small tank bag for our trip our 12 day trip to Poland,...
I agree, I'm sure Ducati would not have supplied a new radiator for my previous DVT, when it sprang a leak, out of warranty and with 33k on the...
Multistrada 1260S 15 months old and almost 23k "fun" miles, off to Poland next week so that will be another 2k :eek: as you can tell I hate the...
Still leak from the Alloy caps on occasions, just a slight weep, on both my 1200 DVT and 1260, mind you that's using the same caps on both bikes....
Evotech Rad guard is a straight swap, as is the oil cooler guard, however the Evotech engine guard for the 1260 is slightly different.
Yes seen those thanks, just looking for something a bit less expensive, good stuff from BSD though.
Looking for a plug and play start / stop button to replace the oem version, to allow easier fitment of a RCS Brembo master cylinder. Something...
Better still some BST cf ones ;)
Indeed I am .
BST's are definitely a straight swap to the 1260, also to 1*98.
Left the baffle in mine, it's plenty loud enough ;)
From my experience, having covered over 70k miles using both PR4's and Road 5's, I found no significant benefit from the Road 5 over the PR4 in...
I use both a Ducati top box and a smaller Givi box on my mount, so I'd say yes it should fit.
Part exed my DVT last year with 34k on it, clutch was fine.
They certainly are a pain to remove, as others have said always use gaffa tape on the rim, I found the easiest way was to try and roll the caliper...
No pictures I'm afraid but offset definitely faces out.
You do need to remove them to take the front cowl off, you have to slide them backwards at the same time lifting the front of them over a locating...
