Separate names with a comma.
Bump! Offers accepted.
Bump! Is no one going to even make me an offer?
Personally I'd give Aviemore a miss. There's bugger all there but tourists and you'll have the horrible A9 to contend with. If you must go there,...
Knock out the pivot and the two parts of the lever will separate. I used a 7mm deep socket to do this. Once they are apart you can lift out the...
My 2010 did that with the full Termi. Solution was to fit an aluminium plate behind the numberplate.
I know a fella who fitted a TS engine to a 2010 with shot big ends. The twin spark will fit straight in. Use all the ancillaries from the 2010...
I didn't fit one to my Scrambler because I can't get the cap on with an LED lamp. Leaving the cap off would be asking for trouble from dirt and...
No worries [IMG]
Hondas are not immune to charging problems and burn out regulators and alternators too. Just last month I diagnosed a burnt out stator on a...
And I should add I had no problem with the beam pattern.
If you have room for the fan housing behind the lamp these LED units are brilliant. I had a full set of 4 H11s on my MTS and they were as good as...
Not really sure why. They both have +ve and earth plus a trigger signal from the ECU. Maybe the P8 is -ve switching and the 1.6M is +ve switching...
OK. It can be downloaded from my Dropbox
