Separate names with a comma.
That looks to be more or less as I recall it. You can tuck the wires in close to the coils out of the way of the battery. When I did a rebuild a...
The Y-piece is just a Y-piece. It has no valves. The pump feeds fuel to the Y-piece and hence to the carbs. When the float needle closes the...
Not an ST radiator. The bottom hose outlet points the wrong direction and they haven't got that bit behind and below the filler cap.
Indeed. There must have been a major redesign between Pantah and the 906/907 which are basically the same bottom end as the 851/888/916/900SS. I'm...
I just checked that today. For the Pantah it is 0.35 - 0.40mm.
I can answer my own question now. The later, longer, starter motor will foul the oil pressure switch on the Pantah.
[ATTACH] Well the starter is off and I did have take off the flywheel and intermediate gear. As you can see from this photo the starter motor...
The M-Unit is great idea but a helluva price though at 259€
A friend and myself both have 2010 bikes, both are still on the original batteries which will be coming up for 6 years old soon. My bike lives in...
Well it's got holes Pete, but none of them seem to line up with the starter motor screw. Thanks for your advice on the starter, sounds like it...
I got the frame back from the powder coaters yesterday. They made a fantastic job. They stripped it back to bare metal and re-coated it. Properly...
Sorry, you're quite correct. :rolleyes: The clutch cover will fit straight on, the only difference is the colour is a different shade of grey.
It would but you'd need to blank off the water pump drive. it would look a bit weird.
I'd have just made a new loom from scratch.
Admittedly I'm much more familiar with the operation of slide carburettors, Dell Orto and Amal, but nonetheless the main jet shouldn't come into...
I doubt if the poor running is related to the main jets. The bike will reach 4000 rpm with no load or a light load long before the carbs are far...
I don't fancy the chances of that thing focussing on the road, the light will be scattered all over the place. The headlight reflectors are...
FYI chaps. The Mikuni and Factory Pro jets are numbered according to the size of the orifice. So a 140 main jet has a 0.140mm dia hole in it....
Hard to picture but I think that makes sense. it sounds like all the fuel to the injectors goes through the second filter, which it should.
The pictures don't make it very clear and the pump has two outlets which in itself is unusual. For any injection system there should be 2 filters,...
