Separate names with a comma.
2V from DS engines on are 7mm
Ducati call the parts you need nipples (!) and they are part no. 815.1.022.1A You'll also want the aluminium crush washers that go under them,...
Well the LH indicator warning lamp on mine is working again - for now. The neutral light works when it feels like it.
I got to see the heads after they came off and to be honest the leak didn't look like a crack. There was a tiny pin hole in the LH exhaust port...
The front head on mine developed a porosity into the exhaust port. Both heads were replaced, completely covered by Ducati. The bike was then 3 1/2...
Yes, of course you can. I assumed from the picture that you are fitting an oil cooler to a bike that currently doesn't have one.
You'll also need to fit a by-pass spring part no. 799.2.077.2A , item 14 on the picture below, or the oil won't go through the cooler. [ATTACH]
Yes, measuring thous also means you can measure to smaller increments than what's available with metric feelers. I've gone the oil stone route...
You seem to have measured all your gaps in thousands of an inch (so do I). The shims come in metric sizes in increments of 0.05mm (.002"). To...
The Desmoquattro engines used everything from 34mm to 40mm except 35mm and 38mm. I don't know about the Testastretta engines.
I know why and I'm all too aware of the potential costs. I just thought I'd post up on a slightly different dash problem.
I think I'll live with it a bit longer before doing that
Many folk have problems with the some of the LEDs glowing dimly when another one is lit. Mine has done that all of the 2 1/2 years I've had the...
JB Weld will fix that
The accelerator position sensors are mounted on the throttle bodies in the same housings as the electronic throttle valves. The cable operates the...
There have been recalls on earlier MTS1200s in the US and Canada. Ducati recalls Multistrada 1200 motorcycles Ducati Multistrada 1200 Recalled for...
That's what I was trying to say above.
Pratz, this thread is about the MTS1200 not Monsters.
I think you don't quite have grasp of how electrics work Jon. Thicker wires and soldered joints means less series resistance, which in your case...
I have Panagale LED rear indicators on mine. No resistors built in and no resistors needed. Before fitting the Panagale indicators I used the OEM...
