Separate names with a comma.
Yes, the axial load on the bearing will be quite small but the bearing should be well capable of it and yes, Steve R is correct, it means...
For about 15 sq ins of carbon! [IMG]
Last year, one of the cush drive pins on my 907 sheared. The part through the sprocket with the nut remained in place, the other bit fell into the...
Yes, but they don't always do it right Nelly. I've seen 2 SR4s Monsters where the TPS angle wasn't set correctly from the factory. One was so bad...
I've just been reading up about the Seimens ECU and you are right, the TPS does and auto-reset after 3 on/off cycles. So it looks like you'll be ok.
Hot glue gun?
The workshop manuals says to reset the TPS using the DDS "diagnostic instrument". If it self reset after 3 on/off cycles I'm sure it would say so....
As far as I know the Evo engine uses the Siemens ECU so JPDiag isn't going to connect to it. Balancing the throttle bodies shouldn't affect the...
I thought all carbon fibre was 'woven'. Maybe I'm just naive. I'd expect the glass fibre ones to be self coloured and red would the obvious one....
I suggested Diopa to someone (maybe you) on ducatipaso.org but it turned out that Diopa only do these in glassfibre for that model.
Belt & braces?
Trouble posting from my phone :mad:
Good find. I was aware that many Brembo parts could be got from KTM but didn't know which models have the radial m/cylinders
Or go to a locksmith and ask them to get you a JMA ZA14P. [IMG] I got one from my local locksmith for a tenner including cutting :)
Not on there own unfortunately. You have to buy a master cylinder "repair kit" [IMG] Pricey in the UK - Brembo - Radial Master Cylinder -...
