Separate names with a comma.
Thanks for that, I just installed the Android version. It looks it will be a lot easier to use than gStrings.
There would be something far wrong with the capacity of the charging system if it can't cope with about 48W for heated grips plus about another 8W...
Likely culprit is the low beam relay. It's the centre relay of the 3 under the LH panel over the fuses. The rear one is for high beam and the one...
£500 fully refundable
Your iPhone will need 5V on the USB. Why risk it? I've never seen a USB cable yet that supplies 12V. I fitted an adaptor similar to this DC/DC...
Getting desperate now? It will come ........................... eventually ;)
It's also available for the 748/916/99* model. The STs are the same but don't have the quick disconnect fittings. But both of them use a different...
This happens to mine every time I want to take the baffle out. I came up with a way of getting it out easily. Inside the end of the baffle is a...
Timing sensor or ECU?
The base gasket is more of a shim than a gasket. It will be difficult to seal without 3bond and you have nothing to loose. If you put it together...
Threebond
The revs fluctuating from 1400 to 1800 suggests that it might be related to the idle control valve (stepper motor)
If you get a nail in it on a 70mph bend you'll soon know that it matters. :Arghh:
Yes, but twice the secondary imbalance although acting longitudinally it shouldn't be obtrusive.
I run a full Termi, initially with the baffle in but everyone told me that it sounded strangled and I had to agree. I now run without but take...
They are 10mm ID. These would do the job: Copper crush washers suit 10mm or 3/8" banjo bolt brake | eBay
Ruined with that heatwrap :Vomit: otherwise I quite like it.
I don't know. There is nothing on that fuse that is only active when the engine is turning. Perhaps a wire has got crushed and 2 circuits are...
I'm now fairly sure it's the battery, try a new one.
