Separate names with a comma.
On my 2010 model I usually get around 130 - 140 before the light comes on and last year I did a 193 miles trip before filing up. The computer said...
The RBW system has 2 twistgrip position sensors and 2 throttle position sensors so that there is a back up if one fails but what seems to have...
No resistors required. I fitted LED bulbs into the standard indicators expecting to have to fit resistors but they work just fine without them....
If you just have a Mac, no. If you just have a PC, no. If you have a Mac and a PC, maybe. Most folk won't have clue either and most of them won't...
Network Attached Storage. Something that most of us won't use.
I use NTSF-3G which needs to be used with OSXFUSE for the later OS10 versions. There is a newer Tuxera NTFS which should work straight off with...
You may not have to take the tank right off but you'll need to unbolt it and lift the back end and also release the fuel pump connector. The plug...
If the DVLA's past record is anything to go by they'll deny that they made a mistake.
FYI chains used to be quoted in Imperial sizes. ie 1/2" x 1/4", 1/2" x 3/8", 5/8" x 1/4", 5/8" x 3/8", etc. The modern sizing is still imperial...
It's never going to happen until bike manufacturers, like car makers, produce emissions figures for their products. And even if it does come...
A 2 wire stator is definitely single phase so it looks like you probably have the '98 450W alternator and by the sound of it it's on it's way out....
Good if it's that easy. Only another 7,300 miles to wait to try it for myself :rolleyes:
They can be done with the engine in the frame ok.
Check there are no tight spots in the chain. At this time of year it will get a lot of crud thrown at it and, depending on your locality, salt.
No. To use the tool the torque wrench must be at 90ยบ to it then the applied torque doesn't change. I've been using a homemade one like it for years.
I hope that fixes it.
As well as the tool for measuring the closer shims you will need a puller of some sort to pull to the rocker spindles, they have an M4 hole in...
Every time you fill up the bike add 1/2 a pint of the old petrol. It will be very diluted with the fresh stuff and won't do any harm.
