Separate names with a comma.
It looks very like the compression suit that Aldi has sold in the past, if so it will be well worth the money. I now use mine along with the...
Yesterday was the warmest day of the year so far. 15c in London and I was out in my workshop and had to take my work jacket off for the first...
Never!!! I even went to a knee down school at Llandow and failed miserably. I don't have the right technique and tend to sit more (too) bolt...
The reason I ask is that I also discovered this, a Nichols "flywheel" which is how they describe it in their catalogue and it seems to be for an...
I am having a cleanup at the moment as I have parts everywhere! and I came across some flywheels, can someone tell what the flywheel pictured is...
I have a set of Brembo radial master cylinders and they won't fit on my 748 as the switches get in the way, the brake side just doesn't quite...
You could try heating it with a hot air gun and then using a good penetrating oil while it's warm but not hot enough to "fry" the oil. The...
Not sure what those discs are but they are similar to the keyhole discs, which do not float. These are 998 discs, no holes only cross lattice....
The seat unit looks really high and those cans look like 54mm jobs, quite long. What's the subframe?
There are these people, they might be worth trying. Stealth Products - UNDER NEW MANAGEMENT and these Welcome To The Disc Doctor.co.uk Custom...
If you are taking the engine out you might want to look at the rear engine mounting bolt as that often causes the most problems when rebuilding a...
Black was never a stock colour for any of the 748 onwards series. You would have to go aftermarket for those, eBay should have someone selling them.
It drives from the inside of the case out, if you put a socket etc. that is close in size to the inner ring pictured around the inside edge of the...
It needs to be driven out, it is effectively an oil seal with a sight glass in the centre. I have removed a few and it's easy enough if you use a...
I don't think Ducati greased these bolts from new, they relied on the plating to protect them and it doesn't. I always clean my bolts up on a...
Gasket sealant (needed) would be correct, the dry clutch Ducati's are the same, the casing is sealed with a sealant in the same way. I am not...
I have a Sigma on my 998 and it's the best of the lot from my view. I have a DP in my 748SPS and it's not nearly as good.
I have removed several of these and it's probably one of the worst jobs you can do. Initially you should be hitting the bolt itself in the centre...
Common problem, mine has just done it after a quick start up. As above there is quite a bit on this.
Just saw these two tweets on Twitter for those that have not yet heard the news. Spoken to Livio Suppo - Marquez definitely out for testing....
