Separate names with a comma.
My neighbour asked what was wrong with my 916 due to the rattly noise it was making - I told him it was a diesel, he seemed satisfied. :thinkingface:
Ride height will increase but only in the order of around 5 - 6mm, probably not alot more than replacing a worn tyre with a new one? Whilst it...
I very much doubt that there is any difference in tyre to mudguard clearance between M600 and M900, pretty sure the mudguards etc. are the same....
If you have an endoscope camera, you could probably get a decent look at the gears through the side of the engine under the cases without much...
Hopefully nothing that serious. I removed the clutch plates and the chain/sprocket so that I could spin the gearshaft freely. Used a socket onto...
When it stops, is it an engine stall or the gearbox jamming causing it? Asking because (not wanting to worry you) my Monster sheared 4 teeth off...
I switched from Arai to X-lite a few years back - another satisfied customer, as it's carbon fibre it is much lighter (with the possible exception...
Mine looks nothing like that, just the one frame mount; [IMG] To add; it's an SD1222 not SD122.
OK, not sure why I got that model (can't even remember where I got it?) but I can confirm that it fits fine and has sufficient stroke end to end...
There appear to be several models that fit. The Ohlins on my 916 is stamped 'SD1222', don't know if that helps...
[IMG]
I have the HPK discs and calipers on my 916 along with a 19mm, 20 ratio Brembo master cylinder (not RCS adjustable) and they work very well....
I've got Brembo M4 calipers on my Monster and the RCS19 is perfect plus, you have the choice of 18 or 20 ratio to fine-tune it. [img] Seriously...
Sounds like dodgy 'O' rings in the female connectors in the tank as per my post re. Tom Parker? My bike stopped twice for no fuel all down to the...
748 low beam headlight responds very well to a HID conversion. I've had this on my 916 for many years, beam cut off is the same as standard but...
Presumably, 10n springs for Showa forks? If so, I have a pair doing nothing (also a pair of 9.5n). The 10's were from my '98 916 Showa forks - I...
I'm using Angel GT on the Monster, plenty of grip and no dramas. Previously had the Diablo Rosso but they wore out too quickly (despite lasting...
Indeed, I originally had a set of 45mm Termis they were supplied with an 062 'Senna' Eprom.
I've re-used old ones without any problem, also used the cheapo ebay 'mixed box for a few quid' washers - but I did have a problem with one of...
Sounds like it's running lean to me.
