Separate names with a comma.
Then that is all you need. Can't see any reason to fit 916 TBs?
Would imagine that they would fit OK, but disconnecting the 2nd injector on the 996 would do exactly the same thing I would think. Both options...
Can't comment specifically on Sargent for SS but I've got Sargent seats on both my 916 and Monster and on both they are far more comfortable than...
Then again, it's 18 years old so if it's not stolen and it runs then is the service history from years back really relevant?...
Likewise, an almost new rear on the 916 and in the tread just like the above. Use a proper 'from the inside' repair plug and it'll be fine.
IIRC the standard 916 pulleys are black and the larger ones I have fitted are gold coloured and were originally fitted to a different model, they...
42mm, they are however offset, following the curvature of the bracket so the front hole is around 10mm further in (towards the bike) than the rear...
Not sure if 996 is the same with regards to valve/piston clearance etc? but I had my 916 heads skimmed by 1mm. Cams needed re-timing and a larger...
I had a head gasket failure on the vertical head on my 916. It leaked all down the back of the cylinder but no coolant got into the engine. If it...
Would think so but you could probably just swap the bottoms over?
Had the same on my 916. At the first service dealer adjusted the brake pedal and on the ride home it started to feel sluggish until it eventually...
Be careful with the shiny yoke, I often find that when riding the sun reflects into my eyes from the yoke - and mine's not shiny. I covered mine...
Fuel level sender stuck?
I believe the carby Monsters all use the same airbox (they use the same carbs). I removed mine to fit split-single carbs but I modified...
Maybe sufficient to move it closer to the gear by fitting a thinner shim?
Does it have both? I thought only the P8 ecu bikes (early Strada, SP, SPS) had both sensors? Certainly pre '99 single-phase bikes have no...
Welding... ;)
I once used Gun Gum on my 916 link pipe, sealed perfectly but was a pig to separate the next time I removed it. Don't use anything now and any...
Found old cush drives, obviously not new but look to be OK. If you want one PM me your address and I'll put one in the post, unless you can...
I had one like that, I think it was an older model? that was the one that the cush drive popped out the back when it separated internally. I'm...
