Separate names with a comma.
As for cush drives, I swapped for a renthal carrier after one of the cush drives 'popped' out the back and ground the adjuster some more (had to...
Indeed, my old one wore the circlip groove until the carrier was rubbing against the adjuster. As above newer (998) version is compatible with...
Don't know if it helps but mine has green and brown to the temp sensor and black, white together with white/yellow and red to speed sensor (3 way...
I've got Cyclecat bars on mine which are great as they are adjustable in every direction as the fork clamps move up/down/around and the bar clamps...
Not looking good. Unfortunately the only way to get a view of it is to remove a cylinder (preferably the vertical) and have a good look down...
When people fit 1098/1198 engines into 916 frames they prefer the 998 or 748R frames for the lowered cross-member (though not a huge job to modify...
Those 'O' rings around the filler are a real PITA to fit, everything is so tight and it would be very easy to damage something doing it, I seem to...
Don't think so, the 748R had the 'Kyalami' frame which was made to run a larger airbox on race bikes - initially for Kyalami in South Africa which...
Reasonable enough access to adjust on my 916, helps if you have a pair of spanners though.
Some time back I would have agreed as I had my 916 cylinders plated by them and it has been fine, runs well, plenty of compression, uses no oil...
Both ways, the one I got from Harris is branded Ohlins. Makes it easier to get in, I don't know what a Monster 1200 is like but there's not much...
I think all Ohlins shocks are the same size? If so the the tool measures 55mm point-to-point or 60mm to the inside, however they are not a full...
True but other than a nearby cable or hose you wouldn't expect it. Is it possible that the closing spring on one of the TBs is broken/damaged or...
You don't want to know. That said, it would have to be have been neglected for a long time to damage the cam, plus you could get them repaired...
I was referring to the old Desmoquattro engines, I don't think Testastretta have the problem anywhere like the DQs did? but I seem to recall...
They're all potentially going to flake, whatever Ducati tell you the new rockers are as bad as any other. I bought a complete set of new rockers...
Connect multimeter to one of the wires and the other directly to battery to ascertain which is positive/negative. You'll only get 12v on the...
Another vote for Newman. I several openers flake, got them all 'Newmanised' and not had a problem since. Not only is it a proper 'fix' they're...
I had a wire/connector between ignition module and coil break on my Monster, it started OK and seemed to idle OK but had no power. Didn't even...
Oil pressure light is permanent positive to bulb with switched negative, low fuel has switched positive, neutral depends on the age of the bike -...
