Separate names with a comma.
A foreign object is most unlikely to come out and impossible to do so if you have a foam filter - it would get 'ingested' by the valves which...
Be even more fun when it gets past the throttle and jammed in an intake valve. :eek:
The plates on the throttle valve are held on to the spindle by 2 screws (at least they are on a 916) and they can come loose, meaning the plate...
2 way connector is for the programming switch, 6 way is harness 1 & the 8 way is harness 2. It maybe easier to buy a new harness 1 complete with...
Ducati Performance catalogue from back in the day here; https://www.4shared.com/s/fpjpw14P7da Certainly most parts NLA, at least from Ducati...
Sounds about right, can't be drawing much current but I'm not sure you can get automotive blade fuses in such a small size though? I just used a...
Not sure what fuse they recommend as mine didn't have a fuse holder built in to it (it had shorter leads than yours) and although my second, older...
Looking at the dash from the rear, harness 1 with the speed & temp sensor is the one on the right. The power and signals go to harness 2 on the...
The info I have shows which colour wire in each connector going to the relevant coloured wire/connector on the bike, basically what you're after....
I've got Translogic dashes on both my Ducatis. The same model as above on the 916 and a slightly older version (with 'ears') but basically the...
I've got that very 19x20 master on my 916 with Brembo HPK radial calipers and I think it's just right. Plenty of power and feel, all the brakes...
From my experience of filters (personal and what I've heard/read), you won't make any gains with any aftermarket filter as the standard filters...
Without investing a lot of money and time you won't gain much. I had my 916 heads gasflowed and CR increased (1mm head skim), I've also invested...
Make sure you get the correct fuel resistant material like Viton. I replaced the 'rubber' washer on my Guzzi fuel tank as it was worn/squashed...
Every cloud has a silver lining eh? Liking your style. :upyeah:
Yes, probably not the 'official' thing to do with the internal 'O' rings as they would prefer to sell new fittings and there is the potential to...
I got mine from Tom Parkers, didn't know they weren't viton and had the problem where the bike broke down. When I called them they said they...
You need; CPC - LCD10004V = Metal female with viton seal CPC - LCD23006V = Metal male with viton seal They are NPT threads, make sure they...
Just to add, I got the Halfords trade card a couple of weeks ago (thanks Rob). Last week the battery on my Son's car expired suddenly meaning he...
Is the fuel pump base the same as that used on the QR equipped bikes? If so you probably just need the fittings, otherwise use in-line fittings or...
