Separate names with a comma.
The angle of the levers is too extreme for anything but a race crouch, especially if you're tall/long arms. I've got adjustable bars and so have...
According to the owners handbook that came with my 916 it has a 3-phase alternator but it's a lie as it's single-phase. All 916 and 748 up to...
Not knocking the Nichols nuts but I've had my 916 for 20 years, done 50k miles and have removed/checked the alternator nut occasionally but never...
These work OK, as long as you keep the torque wrench at 90 degrees to the tool;...
Another recommendation here, Chas Mortimer brought a bike over from Italy for me. Everything done as it should and at a reasonable price, I'd...
Turn it backwards a little over 90 degrees and then forwards to take up any backlash. I don't see any reason why you can't turn it backwards, it...
Do they not also make the helmet in a matte finish? Asking because I bought a carbon helmet last year and it was available in either gloss or...
Normal it would seem, except my 916 which has an 'Evoluzione' slave cylinder that I fitted 18/19 years ago and that doesn't discolour the fluid....
A picture is worth 1000 words, they say; 10mm offset disc; [IMG] Straight edge on disc face to show how far 'out' from the tyre - around 3mm...
I have 15mm offset discs on my 916 (1198 Ohlins forks & radial calipers) and they are noticeably more 'out' than the 10mm ofset discs on my...
As above, standard Ducati is 10mm some 'R' versions use 15mm. Can't imagine many bikes have 0 offset on the front as they generally like to get...
Verily they are shite. I've got a proper clutch tool but liked the look of the bolt-on jobbie as it looked easier to use solo - it snapped like a...
Yes, it's about 3 seconds or so but you should hear it if it's working.
Looking at that pic, I'd say the brown/white is the positive to fuel pump and the black the negative/earth (how it is on 916), if so you should...
Probably the case. Check for 12v at the pump connector to make sure power is getting there, of the 4 wires, two will be for the pump and the other...
No it's a single in-line fuse holder under the seat (at least it is on a 916) with a 16A (IIRC) fuse in it. There are actually 2 side-by-side on...
As well as the relay check the fuse/fuse holder. The fuel pump fuse holder on my 916 melted - the whole thing, fuse included was a glob of...
What? Seriously though I never wore them in my yoof but have done for the last 20+ years. The problem is not how loud yer bike is as all that is...
They all had 5.5" rear wheels, on the 916 they simply fitted the larger tyre. My 916 had a problem due to the wheelnut not being tightned at the...
Had one break about the same some years back. As I rarely use the rear brake in motion, I assume it was from holding the wheel during tyre...
