Separate names with a comma.
:Vomit: Somehow, I doubt it. I rather fear whatever the cost, it was/is/will be borne by the UK, 'coz I can't see that Tony/Cherie had anything...
Agreed, and a slimey, self-serving ***t at that. Always worried me when Blair would holiday at one (or more) of Berlusconi's properties, does...
They're all crap. Mine will work OK if I bleed it properly (need the caliper off to do this) but after a couple of months it's crap again. Not...
I made it.
That alloy bracket is the one that Translogic (used to) supply with the dash, it's the same one I'm using on mine. I did intend to replace the 2...
I've used lithium grease (as per the manual) on my 916 spindle threads but I've also used copper grease, can't see it making much difference? As...
But will it be as crafted as my 'custom' spacers... :D
I made my own for the Translogic dash, picks up off the four disc bolts; [img]
Likewise; [IMG] [IMG] :upyeah:
Nothing serious then... ;)
Basket is worn but I've seen worse, the one in my 916 for one although it's not burred over like yours but it is a steel basket and yours looks...
I've had both a PC3 and then an ECU remap on my 916. Power was no different but it definitely runs better on the ECU remap, smoother through the...
But less to the fork legs...
Not sure what an idle air valve is, but it sounds like something you could remove and bin to me...
Download - Hightail ;)
You were very lucky that it turned over without a piston/valve interface because that could have been very expensive to sort. I suppose it...
It's called 'character'... :D
That is indeed the cam that will spring one way or the other when trying to fit the belt, you can get a bracket thing that holds it whilst you fit...
It definitely shouldn't be like that, the marks are not spot-on on mine but they're no more than 1/2 tooth out. If there's been any piston to...
Check the small oil seal in the end of the gearbox shaft that the pushrod passes through, as these are prone to leaking especially if the pushrod...
