Separate names with a comma.
Just re-read the thread. As the output on pin 24 falls 0-12v then it is not open collector. So a pull-up resistor alone will not work. After a lot...
Pins 26 and 35 will give a 12v supply to link into. Pin 26 is linked to the ignition switch and 35 to the main relay. A pull up resistor is just...
Now try this to establish if the system is ‘open collector’ Disconnect tacho Measure the ECU tacho signal pin 24 with a multimeter (DC): If...
I was hoping you would get poor ground and above readings.
1200 - Diy Service Reminder Resets, Mileage Adjustment And More | Ducati Forum There is also this PC based version...
Check your PM. Historically Melcodiag did struggle clearing service lights. @Derek may be able to assist with an Android based Multistrada...
Can you try this with your multimeter set to V 1. Key ON (engine not running) Touch: Black probe → tach connector ground wire Red probe →...
My first PHEV had £0 VED. My current one attracts £190. My car has an EV range under 30 miles (real world) that costs me £3.50 in electric (for...
Anyone know how Reeves intends to recover 3 pence per EV mile come 2028? Plus 1.5 pence per mile for PHEVs?
Screwfix...
Humour me, try running a jumper lead from the battery negative to a bolt on the engine. To see if it is an earthing issue. At the moment you are...
The company behind Jaecoo https://www.cheryinternational.com/
https://www.autoexpress.co.uk/features/368106/why-are-chinese-cars-flooding-uk
What the motor trade think Brands at higher risk Brands with low brand awareness: Companies like Leapmotor, with just 6% recognition despite a...
If you buy one then at the same time withdraw £25k in pound coins. Then spend a pleasant morning putting the pound coins down a nearby drain. This...
Argento
May help https://www.scribd.com/document/448535343/Ducati-748-916-Service-Manual-pdf
May help https://www.ducati.org/threads/exvl-setting.8864/ And this https://www.ducati.org/threads/848-workshop-manual-download.30272/
To be honest I would leave the EXBV cables and motor off the bike. Either disable in the ECU or fit an EXBV elimination gizmo. If you need help...
An old post suggested they may be M10x0.75 thread
