Separate names with a comma.
Yes, you can use engine oil, or the product you link to. I use Permatex Ultra Slick 81950, a little goes a long long way. As you’re not doing it...
‘Integral slave’ ??? Are you saying the slave cylinder, the one by the front sprocket, cannot be removed from the bike?
I think you do have 2, or more, unrelated issues. The burnt wiring at the stator r/r connector looks like it had been cooking for some time....
Put the cams back on and torque them down it doesn’t take long, then check the clearance. If you’ve measured correctly they should be at or very...
@RAY WYNN do you have a copy of the workshop manual? If not, DM me your email address and I’ll send one via WeTransfer.
That sounds right There’s a short video here on testing the stator and r/r for anyone reading this post in the future [MEDIA]
+1 vote for Mutants on the MTS V4S, just brilliant tyres.
Beautiful:upyeah:
Looks can be deceiving, always best to test both the resistance and whether any of the circuits have a short to ground.
I didn’t realise it had done that mileage, fair play to you :upyeah: at least you actually use it :upyeah:
Oh, I’m sure it has been well cared for, my comment was tongue in cheek really for I’d like to know why a little used bike needs a complete new...
You should have rebuilt the chopper as well :D
Where’s the ‘sad’ emoji or the ‘not good’ emoji when you need it. My condolences and sorry for your loss.
I’m sure I’m not alone in wondering why the need for a new clutch basket, all the plates and the springs? Has it been ragged to within an inch of...
I think your only option in the UK is a Ducati dealer. Desmotimes in the US will have them which will be slightly cheaper but your best bet is...
Nice write up @Guillaume69 :upyeah:. FYI @Mike 999 I too bought the JMP shim measuring tools but just couldn’t get on with them, like you there...
What is the CCA rating of that one as a matter of interest?
You’re in good hands with @nelly he’ll get to the cause of the over fuelling. Do keep us posted when you eventually know what is the issue and the...
Typically a micrometer will fit inside the opening shim so measuring the thickness of that is usually not an issue. It’s the closing shim where,...
In all but one case your measurements are slightly higher than what’s stamped on the shim. How are you measuring them? Vernier or micrometer? And...
