Separate names with a comma.
The valves will still close. At best it'll run crap/difficult to start but worse case you'll get valve to valve contact on the overlap or valve to...
That's the air pressure sensor. That boot fail is quite common... it just gets old. It's not available as a Ducati part, but pretty sure you could...
Could be the exhaust valve doing its thing? Iirc the operating window is around those rpm's
They were, but unfortunately when Jeff sold up, the official status went with him.
The manual I have quotes 166.7mm as the stock length... "The centre-to-centre distance between the two ball joints should be 166.7mm. When this...
166.7mm ;)
Ducati servicing at its best Welcome to Cornerspeed. Nottinghamshire’s only Ducati approved Service Centre. Our aim is to provide quality...
Always with Threebond.
Check the fuses down the RHS of the headlight housing. There's a 3A (iirc) fuse down there that runs the dash. They don't blow, but corrosion...
I can remap the SSie ECU with the RexXer tool. Did one last week after fitting new Termis to her. Gave about 4 bhp and 4 lbft of torque at peaks...
Yuasa.... tried dozens and still end up back with Yuasa. The Li On are getting better and a bit cheaper but unless you're hell bent on saving a...
That's the stuff. Spoke with them at the Classic bike show in January. They've just hooked up with a couple of large trade distributors so it...
SDOC is very good, if a little pricey for regular use. There's a new product to market I've been trying from ProGreen MC. Seems to do the job well...
Hateful stuff. Leave it to dwell any longer than a minute or so and you've got alloy damage, plating damage to the fasteners, screws, hangers etc...
Big ends usually show up as loss of oil pressure... Mains rumble.
Bendix MF work well in both cases. If you're pushing that bit harder the MR compound works very well on track and is still a capable road pad
Yep. Numbers facing up. More important is make sure they're the right way around.
The number of available belts has been rationalised. 31A's, 61A's Are now obsolete with 91A's being the one belt left. I believe it was the latest...
Both benches now sold.
The Grip bench is sold :)
