Separate names with a comma.
As long as they lined up when you installed them, that’s what is important. Due to the teeth on pulleys and belts, they won’t realign after just a...
Where did the dodgy looking 900 mile 916 go?
I know I have done it that way on 749 and 1098, both with full fat 57 and 70mm pipework.
If you remove the manifold nuts, can you then remove the entire exhaust section from the bike? Then, on the bench, you can attack the joints that...
See above.
According to Haynes manual, manifold nut torque is 10Nm.. [ATTACH]
Not at all sacrilege, I would certainly do the same! Get it bought!
+1 to this too.
Does this appear cheap, even with nasty cast swingarm?...
They offer a more positive and accurate adjustment method compared to the standard Ducati ones.
Here’s mine, so you can see what it looks like.[ATTACH] [ATTACH]
If you’ve got it…spend it! Can’t take it with you! Is the Bagnaia Rep a V4R btw? I know nothing about these new-fangled bikes!
I have one (not for sale though) - I got mine second hand off eBay many years ago (it needed a helicoil repair to one of the threaded holes so was...
As title. Knocked the RH mirror off my M1100 in the garage yesterday (arm snapped at attachment to bar). Anybody got a spare lying around that...
I am now confident that my bike is fixed so finally put oil and filter in the 1098 following the water pump seal failure back in May. I pulled the...
Finally got into my garage to take pictures of the Dzus receptacles on the nose fairing of my 1098 for you. The ones I have are riveted on, rather...
Welcome! Nice bike.
I used to gently twist the calipers to move the pistons back, as above.
So your advice would be - don't get tested as it may reveal that you are at imminent risk of it failing which could affect your legal right to...
Spookily Just heard of a friend of a friend who died of this.
