Separate names with a comma.
I think these had the separate immo box. There have been instances with the ST4S (uses same immo box) where the solution was to disable the immo...
HD stands for heavy Duty X stands for 3% Moly (Molybdenum) The 2 stands for NLGI classification Interchange info...
If your bike was fitted with a non-linear TPS then that would apply. Your 749 has a linear TPS and reset is done via diagnostic software. Post...
Guys on the forum have had similar due to loose battery cables
Both times when raining? If so, could be an electrical short. Usual suspects are relays. Bike probably dries out by the time the dealer sees it.
Send me the ECU. Mine has Akras as well. It could work for you.
iPad 2 works fine
When I got my 1198s I was having problems with slow speed manoeuvres. Was like a bucking bronco at times. Dropping to a 14T front sprocket and...
16 should do the job
The coils will fit, they are compatible with lots of models. Early 749/999s had coils without fly leads. They were changed on later models. The...
That uses the IAW15M ECU. You can use the same leads and then download Guzzidiag for free. You then choose a Guzzi that uses the IAW15M ECU. TPS...
TPS reset is a good start. Invest £20 in the cables from LonElec and download JPDiag for free. You can then DIY.
Codes will only show if EOBD light is illuminated
By the bolt of the starter motor I mean one of the 3 bolts that attach it to the engine casing. Only one is exposed the others are covered by the...
Cleaning won't work. Beefing up will. The -ve lead goes to the left side of the vertical cylinder. Just follow the lead from the -ve terminal. You...
Yep, a job for the Relay Johnny Mod
It is down to the crap heavy duty leads used at manufacture. Over time their resistance increases. A simple fix is to run an earth lead from the...
Did you retrieve any fault codes using the dash button? This bike can suffer serious problems due to a £1.99 part. There is a relay below the...
Clamp on to one of the Allen head bolts
If you have some jump leads try running one from the -ve battery terminal to a good earth on the engine. See if that improves things. If it does...
