Separate names with a comma.
The Termis are a bit louder. There's more of a "bark" to the sound, the tone changes more than volume. There's a fair bit of weight saved as well....
Speedymoto do an under bodywork kit for the SS. Replaces the engine mount as per a "proper" set up but the pucks are a lower profile so they sit...
You won't have a problem with either of those. Up there with the best in the UK :upyeah:
Yep. If its just cosmetic improvement, fit a pressure plate and maybe some stainless springs and alloy caps. Job done and you'd save a good few...
Think the HPK stuff reverts back to 320mm. You lose the spacers from under the caliper mounts.
Not much more to add. It's a replacement ECU, plug and play. £250 inc. vat and should be available sometime May onwards..
Pretty much any slipper for the dry clutch bikes will fit your 749. 1098 uses a bigger centre nut, but some kits come with both sizes. watch the...
Yep. It's not Skyhook. It picks up info from CANBUS relating to speed, throttle position etc. and adjusts on that info. It also takes into account...
The evo tech stuff is very hard to better IMO. Well made, fits very well and whilst maybe not the cheapest, it's defo very good value for money....
Have you adjusted the chain lately? Reason being, when the hub clamps are loosened to adjust the chain tension, then water can and usually does...
Avanti do a nice one. I use it over the factory tool. About £15 iirc
The discs that Kwack used Matt, were more petal than wavey. The edges and shape were much less aggressive. Conventional discs use drillings to...
Ducati geared all the bikes of this era quite high. It was to get them thru noise emissions apparently in the ride by tests. ST4 was geared for...
Seems a bit low tbh. I'd expect around the 100 mark before the light
Personally, I wouldn't use any wavy discs, on any bike. The stock Brembos are 330mm as well as being lightweight. To my mind you'll only get 320's...
Genuine ones aren't that badly priced £5 to £7 or so each. Quality is second to non and you know they're right :upyeah:
There's a lower seat available -20mm. The SP is the highest of the three new hyper's though. Maybe consider the "normal" hyper and with the -20mm...
Never seen a steel sprocket on a carrier tbh. If you're going to invest, Renthal may be a bit more but they do last. The cheaper sprockets can/do...
400 or 500 quid..... Depends how you go about it. Getting you're ECU flashed is probably cheapest..... Look up CJS racing on here or the net....
