Separate names with a comma.
I ran the Ducati taller screen on my 1098 and it worked pretty well. Looks "right" to as it follows the fairing lines. I didn't go for a double...
Hold fire.......Been chasing this with the distributor and should have the Afam in 5 weeks or so for UK supply.
I fitted a few and they have been ok. There are much worse out there. I'm with Art on this though. Brembos RCS are crackin bits of kit and worth...
Tank bag - Ducati Superbike Accessories
Ducati Performance tank bag to fit 848/1098 and 1198. RRP £199.75 Cancelled order that I took a 10% deposit on. Their loss, your gain plus...
Got a few tyres taking up valuable space. I'd prefer collection only I'm afraid. Bridgestone BT014 190/50 17 - £40 Bridgestone BT002 Street...
The connection under the seat is for charging only. There's no way it would carry the current to start the bike. Don't connect a booster to that....
No Antony.....MTS runs a 530 chain. Everything else is pretty much on 525 with a few on 520.
The issue, or potential issue, is not the current draw on the battery because as Gilps says the circuit will only draw what it needs, but its the...
Had a quick look around on line. Afam aren't listing one. Renthal neither. Other than what you've found, I can only suggest talking to Talon and...
Check either bike torque racing or b&c express. Btr are uk distributor for afam. B&C distribute Renthal or will make from a blank. Talon will also...
You won't need a new chain for one drop on the front. It's good practice to replace the chain and sprockets as a set as worn parts will wear the...
I'd defo give the new pads time to bed in. Try also tying the brake lever up over night. Run a zip tie around the bar and lever and tighten to put...
Sliders or not is always a debate. The thing with a lot of slider kits is how they are mounted. Looking at the Sato, I reckon there'd be...
Standard will be the assembly tolerances. Max will be service tolerances. I'd see where they are before thinking about changing. Even service...
Them there are the ones I have. Would do you fine :upyeah:
Had a look thru the catalogues this morning and Pirelli/Metzler don't seem to cover the 190/50 in any of the track tyres now. One supplier has...
Yep. be 'bout were Freak says. Like Andy says, depends on who and what dyno as well ;)
No impact socket will be made of ali....they are generally black finish and 6 point, but always steel. You'd be better off getting a quality steel...
If it is a 6" rim, then 190 is the correct width. A 180 will be stretched as you mentioned. If it part worns you're after then you'll struggle....
