Separate names with a comma.
Here's a handy chart showing co to AFR CO% to Air Fuel Ratio (AFR) Table : How-To Library : The MG Experience The higher the AFR the leaner the...
What spark plugs are you using? Iridium? I would stick some new stock plugs in.
There's some Akras on eBay Ducati 848 Akrapovic | eBay
Akras with DP ECU (for starters) Custom mapping later ;)
Wait till wife goes out then use this [MEDIA]
Go for a long ride and when you get back take the oil filler cap off. Let the bike cool down and then replace the cap. The milky film is just...
Chicken wings and a small bar end mirror on the right bar.
+1. If it was an immo issue then the bike would not turn over. Using the ECU I sent you, disconnect the wires to the immo unit and see if it still...
You are in luck. PM me if you want further details
The software freezing can be solved by putting a USB hub between the KKL lead and your computer. A cheap Trust hub will do and it doesn't require...
There's a handy number checker here Ecu DB search Your ECU can be re flashed. I will check to see if I have the full system map with DQS.
SBK 1198S TSE indicates that you have a stock ECU The DP slip on ECU message is 1198S RACING and I believe the full system ECU is 1198S RACING...
No
Who told you to connect to the DDA? Pay them a visit and kick them in the NUTS. The 4 way connector on the DDA is identical to the diagnostic...
Mike, the pins on the Coil connector (a 3 way BSK Bosch) are 1 = +12v from coil/injector/fuel pump relay 2 = earth 3 = ECU trigger The black...
Everything you need is in this post Free Diagnostic Software | Ducati Forum
It needs disabling in the ECU so you don't get an EOBD on the dash. The pulley and spring can be left in place as they hold the EXBV in the open...
With an IL4 you can use the old 3 for 30 for riding round town. With a V2 you find 2 for 30 works better together with a little clutch slip when...
The ECU needs to know when the throttle is closed. It gets this info from the TPS. The usual indication that TPS is out or faulty is stalling when...
Speak with a local company that does motor rewinds. They may be able to refurb it for you.
