Separate names with a comma.
There's no KERS :wink:
Sp is £11850 iirc. Crackin bike at first look.
Is the pushrod clearance adjusted properly? The cylinder return spring is what acts on the the lever to return it fully and push the switch......
The ti bolts can be used 3 times as mentioned above. The steel ones are throw away. Obviously, if you know this is the first time they've been off...
No stick. The updated software is downloaded onto the dealers DDS and uploaded to the bike via that. The software will load the correct maps...
They're a fine pitch. M10 x 1.25 iirc
The ecu can drop a coil driver. Avanti can diagnose and repair if needed. Drop antonye a pm on here. Only strange thing is the plug being dry as...
Pretty sure is 7.5W. Don't have the air gap info to hand, but can dig it out tomorrow. Is the bike on Showa or Ohlins?
Done!!
Just done the first one for a customer. Not ridden it yet, but it's tweaked to offer "Improvements to rideability with OEM exhaust and with DP...
the multi hasn't used the Siemens ECU. been on Mitsubishi since day one. There have been software updates along the way though.
Yep, sounds like the stock filter
Only manual at present is on line via the dealer system. Not had any indication when a hard copy or DVD version will be available either
Or you machine the 916 barrels.... Trouble using 916 pistons is the weight. It really needs a crank balance. Drop in kits usually match 748 piston...
It's a torx. Odd size though.....T7. Allen key will work if they are pretty new and not corroded. The screws are very soft though, so be careful...
Check also the spigot that the tensioner pulley mounts to. It's quite common that it unscrews when you undo the tensioner nut but doesn't get...
The head light is a similar problem. Flip it on to hi beam whilst you warm the bike up. Not a permament solution but it clears it. You can pop a...
The clock unit houses the air pressure sensor, so is open to atmosphere. Of late it's been quite damp. As the clock unit warms a little or even...
I've got a few of these to get rid of.... Brand new in box and never used. Not your usual "toys r us" models and would probably suit if you have...
Cool. Then your assumptions above should work then. Can't see you damaging anything giving it a try. Wire it up, and test. Stand down = no pump at...
