Separate names with a comma.
will do. i have it on cd but my older laptop plays up sometimes.
yes, thats the one i found on youtube
i,m getting 0.6 at all 3 wires with the multimeter set at 200 ohms
does this stator look ok ,or should i replace it. discol[ATTACH] [ATTACH] [ATTACH] oured on one side
it was a TEXA that was used and i was also told that all the local mechanics use texa as well.
thats what the bike mechanic said with the non ducati diagnostics, test everything separately . i will try and get it tested on something that can...
thats the one i have ordered from aliexpress , £1.90 in a sale. rather than paying 2 x p/p and their time rewinding it. i would rather buy a new...
thats the main problem i have, i cannot start the bike to test the DC voltage because the error code will not allow the bike to start. if the...
tested the stator and the ohms reading is 0.00 . i will be removing the casing to double check that the stator has burnt out .just waiting on my...
found the info, its 0.3 ohms
you have replied to a previous post on this subject. i was asking about the ohms reading at the stator
hi, i think i have the same problem. can you remember what the ohms reading should be at the connector that goes into the rec/reg. i cannot start...
its not a ducati diagnostic computer, but he said it would work ok on that bike. i can try another mechanic that has diagnostics and see if it can...
current fault
fitted new battery and mosfet reg/rec and the mechanic put diagnostics onto the bike. it said that there is a power outage, so i will have to...
cheers
as you look at the battery is it to the left or right. the two that i mentioned are to the right. thanks
i had to cut it out, both the brown wires and the inside of the connector looked bad. i,ve misread the handbook then. just hope a new rec/reg and...
before i buy a non lithium battery and a mosfet reg/rec, i have fitted another battery and reg/rec and i still cannot access CODE to override the...
i,ve done both already. next step is a new battery
