Separate names with a comma.
I’ve emailed Craig. Andy
If I wasn’t thoroughly confused, I am now. Andy
That pretty much matches what I’ve got but what does that mean ? Andy
So PBM ran Stuart Easton on a 748RS in 2002 and Steve Hislop and Shane Byrne on a 998 in 2003 and 2004. 749R didn’t enter the fray until 2004. So...
My memory is shit :joy: Couldn’t remember that I’d advertised them before. Andy
Missed that. Andy
There is/was a concern that the Corona virus could be transmitted by handling contaminated bank notes. Andy
That might be a line to follow up. Andy
I found this post, http://www.motoforum.net/topic/134688-ducati-pankl-connecting-rods/, looks like boxes of bits from Paul Bird Motorsport are...
The only guide I have is from the Ducati Parts listing on eBay which is £450/pair. It would appear from the current to and froing, before I agree...
Ooh err, mine measure 127mm. Wtf have I got ? Andy
Infuriatingly, my vernier is about 10mm too short but centre to centre is approximately 127mm.
Their (Carrillo) rods for the 748 and the 996/998 are the same overall length which has confused me. The Pankl rods I have that are definitely...
Hard to find such specific information. Any pointers greatly appreciated :upyeah: Andy
No problem but thank you just the same, it gives me a ball park figure. Interesting their listing states 748/996/998/999 as I have a brand new...
Not hobbling quite so uncomfortably today so have spent a bit of time outside in the warm, fresh air in my back garden. I’m progressively turning...
I have 4 (what I believe to be) matched pairs of Pankl 996RS con rods, 2 x part number 65P2A006b which is an A dimension rod and 2 x part number...
That's because they are used. Andy
I run Metzeler MT01s and M7RRs at 2.6 to 2.7 bar which is about 39 psi. IME, you will know soon enough if the pressure is about right from the...
Looks like it’s to order only from all the usual suspects. I do however notice, Reactive Parts may soon be added as a forum dealer so might be...
