Separate names with a comma.
CJS is such a trek is the issue. The local guy to me who is supposed to be good with Ducati and does mapping I had a bad experience with.
My slipper has always been quiet as a mouse unless I pulled the clutch in.
It's only when I'm holding a steady throttle at 30 or 40 in traffic and when I roll off she pops/bangs. Won't be doing any more to her engine...
Ok, how's this. Assuming it's because the inside pushy bit of the new slave is slightly pushing on the rod causing the pressure plate to not sit...
My hand is killing after 2+ hours. It stops me having a full day as I can't use it for longer.
Slipper clutch is STM ball/ramp and has been in bike for years. In September I greased ramps and fitted new spider spring as the other had broken....
I wasn't using guide coats, but should have. Am now and I can see the difference but don't have the drive to rub off all the good paint. I have...
So......where can I buy various sizes steels,?+???+
My 996 with 50mm termi pops and bangs all over the place. Will a power command sort it and can I do myself or do I nerd to take to a expert?
I countioundulu think about filling and spraying :-) :-(
So very very drinking
What id really like to know now is where I can buy different thickness drive plates?
Previous owner fitted. STM slipper. As the new slave is not OEM it's possible the plate inside that pushes the rod may be a different distance...
Slipper came with the bike. I need a replacement steel 1/2 way between the 2 in thickness but I can't find where to buy them :-/
Removed fairing, stripped clutch, reassemble, did it wrong, stripped, reassemble, all good, fairing back on. Must have been 15 mins maximum. Do...
Good ride and fine on the move but pulling away on 1st makes a grabbing/slipping /grinding noise. And neutral has left the building. I take it I...
Yep
321 and we are back in the room! Neutral is now rarer than sex after marriage though :-/
That's not helping. Must be increased stack height......
Hey Got massive clutch slip. Changed clutch slave since last ride in November so properly that. Bike has a slipper too. So I need to lower the...
