Separate names with a comma.
So far the shocks have been restored and the correct Tops fitted with the aftermarket bits removed. The main frame, sub frame and wheels have...
My plan was to finish the 916 restoration and take it over to the TT classic, after today's news I now have an extra year to finish the bike
I don't seem to be able to add for sale posts in the advertising part of the forum. Do i have to have some ammount of post count before this is...
very nice and welcome
Looking for a set of undamaged left and right lower fairings for my ducati biposto 916 1998 Drop me a message if you have either. Cheers Jamie
Look forward to following this over winter
That's exactly what I'm after, cheers mate
Right that's the strip down finished! Probably will be a while now till I post again as the engine rebuild all hangs in the balance waiting on...
I need to remove the bearings out of the cam end and also the brass insert in the clutch casing. What kind of tools do I need to complete this...
Great info guys, it's as tight as hell so now I will swing off the spanner :-)
Tying to remove the threaded mounting for the oil filter, does anyone know if it's a left or right hand thread? [ATTACH]
Left school at 16 with nothing, did an apprenticeship in fabrication and became a skilled plater. Six years in the industry then made redundant,...
Also Peter Hickman posted a picture of his engine he had coated, I got the company name and they priced around £400 to coat the whole engine .....
Finally removed both inspection windows (pain in the arse) also removed the main clutch oil seal.. Now struggling to remove this seal and the...
My plan for next week is to strip down the heads and valves, on the videos ive watched they use special tools for the shims and also a slide...
great news Paul
Didn't realise it was as simple as that lol prepping the cases by removing that and the bearings ready to be coated Jamie
Any tips on how to remove the inspection window? [ATTACH] [ATTACH]
So had a good go on the engine today and finally finished stripping her. Next job is to try and remove the bearings, not sure whether to get a...
Bought a 8mm triple square from ebay, thankfully worked first time [ATTACH]
