Separate names with a comma.
So it turns out that whilst I have drill bits small enough I don't have a small enough chuck. Need to order one as I've accepted the challenge...
Challenge accepted ! I'm must admitted to being stunned by the controversy I've unleashed. I do get the point the Task Mule is making about...
Would these be the same dealers that fit 'track use only' termi exhausts for customers to ride home The MTS1200 and hyper ones are exactly the...
Like all forum advice, if you are in the slightest bit concerned then ignore this. If you are genuinely interested then consider these points...
The original pins in the brembo calipers are corroding and looking unsightly. Stainless steel replacements are about £6 each x 4 (I just bought a...
About £16
Ordered a set.
Be real keen to see photos of them held in the location that the OEM ones mount, even if just by hand. Think I might get a set, were they posted...
Nik Which lights did you buy. I'm looking for something discrete/small. Prepared to buy cheap Chinese on eBay and modify if I need to as don't...
If it is still under warranty I suggested just uncoupling the cable and living with error message until you get it back to dealer. Just take the...
Disconnect the cable and open the valve.
I had the exact same issue. Thought it was a misfire but turned out to be exhaust valve. No error messages on dash about exhaust. Valve wasn't...
My 2012 S model started to leak on RH side. I (wrongly as it turned out) blamed the reliability of the bike (I've had my fair share of issues). To...
As per ducati.ms, it is possible but would need a bespoke micro processor as an adapter. That wouldn't be hard as the 2010-12 canbus messages are...
So it was stiff but not seized (assume shop freed it up a bit). I have removed the disc from the spindle and left everything else in place for the...
MD Racing in Walton have just diagnosed it as a siezed exhaust valve. It had stuck briefly a couple of months ago but I hadn't thought anything...
Just to confirm, the JST connectors I mentioned above are the correct ones, both for the USB (2 pin) and Ohlins forks (4 pin). Finding the Ohlins...
My 2012 single spark seems to have developed a misfire. Starts at about 6-7k rpm and is far worse under load. Havent been using it much recently...
Your offer will no doubt be the most practical solution. I needed one for my forks a spent quite a while trying to work out what they were so...
Or try this if you only want one ( but you are as cheap buying 5 from CPC) Ducati Indicator Turn Signal White Sealed Male / Female Connector
