Separate names with a comma.
Yeah., have to solve it somehow, in the best way.. w/o too much of a rush. Really I wanted a clear answer within five minutes! :eek: Took three...
Problem solved. Confirmation: Boss of 600ss alternator is thicker. Solution: Three choices. Two with cupped washer, one without. Recalled that...
OK, I think i know exactly why I have the problem: The engine was fitted with lightened steel flywheel donated from a 600ss. Most likely fitted...
Further Qn: Perhaps the rotor profiles changed - i.e slightly thinned down for the later bikes, which would therefore present no problem?
Qn: Is it OK to fit the new flanged alternator nut without a cup spring washer on a 900ss? Current replacement nut if fitted with the original...
Ah cheers for the reassurance Sev. Yes, standard cans. Oh yes, The hazel leaves in my garden are brittle already. They make nice music in the wind.
:relieved: Ah cheers for that confirmation Sev. I'll soon be ready to start up, and take to the road, my fresh 900 ss engine bearing rebuild +...
The title asks the question I'm pondering, because I'm without them. Its a sort of cone that fits within the connection between the original...
Happy New Year to all you good folk, here. I'm thinking of ditching the outer black rubber gasket on the fuel filler neck inlet/cap assembly ,...
Hey slim Cowboy, DId you get your documents through and sorted? I guress you mean COC from Bolgna. What I am tinking is that the 600cc, based upon...
Try this link. Not sure if it'll allow you to download or not, suspect it will....
Yeah I got one in pdf. Too big to send by my email provider. If you have a plce I can upload it to, I'll do that. Perhaps a guest on one of your...
I noticed an o-ring , as seen here https://www.bike-parts-ducati.com/ducati-motorcycle/Supersport/1992/900_SS/900-SS/CLUTCH/496/2302/0/496 which...
CHeers Desmo, yes its the one with the release vlave in the cases. I reckon it'll be OK. I found the gear to gear gap was on the large side too,...
I have some round gear markings on the oil pump cover. I wondered if on these pumps (a 1992 900ss), it's a good idea for pump operation, to skim...
West London.
Received my new bearings and they were both RHP, with 'Made in England' stamped on them, as expected. SO I'm happy.
Thanks. OK , I understand. Well, those fragments betray catastrophic failure. COmapring to mine, which were RHP, mine did not disintegrate in that...
You did well to nab that developing fault. I suppose then that it was Neil at Cornerspeed that told you about what bearings had been fitted. I...
Terrible what you report. What were the symptoms which alerted you to failure? A warning, even for good bearings, about laying up: I think...
