Separate names with a comma.
Multi 1200s 2013 62000+ miles. Just gone over 62000miles and the odometer started displaying dashes. The trip counters work fine. Has any of you...
In my case I replaced front sprocket that was completely gone, chain that was stretched well over the limit and the rear sprocket JT 40T (carrier...
@Bumpkin - My setup could be another option. Although mine is the 1200 2013 I think they use the same sprocket. I have on mine the JT (JTA760B)...
Just noticed the same cable disconnected on mine. It is the Oil Pressure connector (actually on mine has a label stuck on the cable - "OIL.P" )....
Never looked at X-lite and possibly I should as it is a bit rounder than more oval. Is the x-lite x-1005 better (up market) than the Nolan N1005...
Hi all, I am having a problem finding the right flip-top helmet for my head - I bet I am not alone here. I consider my head shape to be slightly...
Final update All working fine now! Engine on - idle = 14.4v Engine rev to 3000 =14.4v Riding bike revs range 1000 - 7000 = 14.4 - at all times the...
@drax dave - thanks for the kind offer but I think yours is different. Its better I use exactly the same type to avoid introducing other issues in...
So although the rectifier part (diodes) seem to be OK the regulator part must be faulty. I guess next move is to source another Regulator and...
Always listening to Derek - he is a fountain of knowledge!! @Derek -just took some more readings more carefully. Ignition off = 12.91v Ignition on...
Multi 1200s 2013 -58K miles Error on display "ABS2 and "Battery". Bike starts ok and runs good but errors come up and display backlight switches...
1200s 2013 Skyhook - 56K miles All, I need you to confirm something for me. For the last few rides I felt the suspension to be too soft and...
Multi 1200s 2013 -- 55467 miles here. Minor issues but all sorted out by myself. Doing my own service (including Desmo) and repairs and always use...
They will stretch and is not advisable to be re-tentioned back to the original spec. So it's important to know what is the "inspection value" of...
Ducati states - Brand new belts - set to 110Hz - "assembly value". After being used they should be at 80Hz +/- 5% -"inspection value".
@Exige - when you say "bearings" do you mean the rollers, the adjustable and fixed ones?. Also, any idea what the Exact should be at after being...
@gmoss - mounts checked, all tight to spec.
Multi 1200s - 2013 - 54k miles. Some questions for you all. Noticed a bit of engine vibration over 4k rpm on all gears. Pulling clutch in it...
I put my money down to the wheel bearings. Bad vibration could confuse the abs sensor. Actually Ducatis are quite reliable (...
@gmoss - just wondering.. have you ever used jpdiag to clear any of the messages before ?
