Separate names with a comma.
My 916 basket had a bit of a wobble, since I needed to replace the clutch I pulled the cover off and replaced the bearings after checking the...
Check the barrel connector to the top right of the where the battery is. Disconnect it and see if any of the terminals are sitting low relative to...
Look for some EPDM seals, 6mm ID, 10mm OD and 2mm thick
He's got a seasons worth of "1" stickers to use before they go in the bin
I didn't really pay much attention to the news of the release until I saw the Bike World video, Chris seems fairly positive about so I'm keen to...
Give the master cyl bore a polish while you are in there, I like using these pottery sponges in a drill with some Autosol Alu polish. The larger...
I always buy my mosfet R/R's used, counterfeiters don't seem to be able to replicate road grime Pretty sure I have seen some pics online on how to...
Aaah gotcha, looks like I was thinking about the other style of filter they had on some years. It sits in a little rubber sleeve on the right hand...
Interesting, is that this type? [IMG] I was using a Ryco Z382 until I sourced the above ones from eBay. The Ryco is very similar but is a...
My 95 BIP has the same clutch cover
It's been a short while and progress has continued. After the brakes were sorted I found the clutch was worn out, while inspecting it I found some...
If you can trust yourself to remember to fit it before riding again you can take the oil cap off once it's hot to allow water vapour to escape....
Why do shops use vac bleeders? Some people's time is worth more than others :p
I I use the same on empty lines then once fluid starts to show I switch to the usual method. Can take a long time to get the air out otherwise.
Uccio seems to have done that for him “Ducati asked us so we helped Pecco a little bit. He tried our bike, Morbidelli’s bike at the Misano test....
