Separate names with a comma.
You can try winding off some preload on the right leg, if you have any wound on? The further the forks are away from full extension, the less...
No border control when I went in 2 years ago but, as others say, be careful. A guy from Chamonix was caught doing 90kph in a 60kph in Switzerland,...
Cheers Bumpkin, think I'll give that a go. Managed without one for years, just soap, levers, rim protectors and a bead breaker but, over the...
I've been looking at that machine, way cheaper than the Rabaconda machine, how are you getting on with it? It looks like it'll move around on the...
The Sachs can clonk on full extension, when the suspension tops out.
I certainly wouldn't worry about it on a 30 mile trip home, they are pretty aggressive and probably not great in the wet but, they're not going to...
https://www.ebay.co.uk/itm/226628424493?_skw=multistrada+fuel+tank&epid=7045187486&itmmeta=01JPVX1VXRY2HPZNVSYXAXWZM0&hash=item34c41b532d%3Ag%3AJlI...
Looks like someone may have spun the captive brass inserts in the tank and replaced them with nuts and bolts?
I don't believe so, just swap over. Never changed one myself but have looked into it as it seemed fairly common. £120 is a bit harsh!
Very easy, just need the 'special' socket, or butcher an old one with an angle grinder.
My 2013 did this when I bought it, took the switch apart and sprayed lots of contact cleaner around the red button, never happened again and that...
I did it a few months back on my GT, used the standard ball bearing type, figured they'd lasted 12 years and 53000 miles so can't be too bad. Need...
Just buy it! You'll save £25 not having to MOT the PP!!!:p
How did the old bearings look? Any sign of wear or corrosion?
MBP did some modified collets, I can’t remember what years they were for. They were supposed to to combat the wear of the conventional half rings...
Oh, block the oil ways in the head with ear plugs, you don’t want a half ring falling down there, don’t forget to remove the plugs!!!!
I usually fit new half rings to the closers out of spec, brings them right back. Ideally you should re shim and get the rings back in the way they...
Half rings flying everywhere lol
A heat gun on the front hub makes life easier for removal and replacement, get it up to over 100 degrees, which takes about 5 mins per side, and...
Perhaps I had a Friday afternoon chain, it developed a nasty tight spot too, had to bin it around 6000 miles.
