Separate names with a comma.
Mate, you’ve done less than 500 miles in a year, is there much point in owning it? I presume you have other bikes to ride? My bike will be 10...
I agree with you on the budget, in the UK you'll pick up a rough DS for £1500 or a very good one for £3000, you'll soon be spending on the rough...
Having owned an early 1000DS before my 1200, I'd avoid them nowadays if I'm honest. They're old bikes and can have some issues which aren't cheap...
I've had a couple of similar issues, on a 1200 not 1260, but thought worth a mention just in case. Horizontal top plug lead caused a missfire when...
£900 sounds pretty reasonable to me compared to main dealer prices. When you get the price they usually state one price for doing the clearance...
Just realised that I did this valve check last April at 30000 miles, I'm now at 41500 miles so will be doing it again in a couple of months, that...
That's really hot, we had it at 35 down to and through Monaco, that was bad enough. Tunnel was fine for us, my first time on it, I was expecting a...
They come in pairs, one pair per closer.
Anywhere within the checking tolerance is fine, although I always try to get the closers towards the tighter end of the tolerance. I’d recommend...
I got by with a few wraps of insulation tape for nearly two years before I replaced the lead.
Mine also looked fine from the outside but in damp conditions it would arc to the head, found out by touching the cap whilst running, bit of a...
Number 12 is what you want, in the picture it’s marked as horizontal but going to the vertical head.
The diagram is wrong, ignore the picture and just order the horizontal top plug lead, I went through this and ordered the lead as in the picture,...
It's all about knowing the roads, which I don't in any of the countries! I had to cover a fair amount of ground in each given day through France,...
Finished my Euro tour yesterday, 9 day trip with 7 days riding covering 2480 miles. My 13 GT performed faultlessly and now has 41k miles on the...
The aircooled Multi's are quite saleable and have a good following, all depends on what spec it is, mileage, panniers etc. Being as that is the...
Just changed my front bearings as they were getting a little rough when turning the inner race by hand, felt fine when on the bike and spinning...
Well done! Cheers for sharing, I'll remember this tip for the future.
Cheers guys, I'll give some of the recommendations a whirl.
Hi all, what do you guys use to get the shine back on the black plastics on the 1200, specifically the beak/nose section and front mud guard....
