Separate names with a comma.
No and it would appear that most who have not had the valve illiminated in the ECU use a dead weight attached directly to the little motor to fool...
Sorry but I do not see a reason for this rhetoric. Who are they trying to convince of this "exclusivity" or is it prefacing a likely to be...
Technical term in the vehicle body shop is mopping and yes they use a very fine abrasive to remove the oxidised surface to bring the shine back. I...
The clutch centre will rotate about 5 degrees to release the compression on the plates and then back again. It will do this as often and as...
IMO you should never been allowed to leave with that M7RR fitted, end of. The occasional tyre makes it through the quality check with defects,...
And a track prepared NC29 both of which she rides with considerable skill and enthusiasm :). Andy
You require a drift slightly smaller than the pannier lid pin and a small hammer. From memory the pins only drive out one way which is obvious...
Sadly you may find that the established main players offering key cutting on the high street will not cut a key blank supplied by the customer. I...
If you don't have anything, 3M do a couple of good products. Andy
So I now need educating, the clutch operating rod has been removed and the short part from the slave cylinder end to the 2 'O' rings is dry and...
Acclaimed young dancer killed in London whilst riding his motorcycle. Young talent snuffed out at the start of a very promising career....
Carbon is no more or less resistant to impact and abrasion than fibre glass depending on how it is laid up and resin applied or pre impregnated....
Stick with double sided sticky tape (no pun intended). Andy
To all intents and purposes it looks like the standard road breather but the non return flap is in the air box after it's gone through an under...
Hi ma Hi mate, good to meet you on Thursday and I hope you had a good evening session. As you might remember the bike was on a slope ? When I...
An interesting thought. I have a fully open clutch casing so I might just strip the clutch out to have a look. Thanks guys for your thoughts, it's...
Clearly age is affecting his memory, Noriyuki didn't win a championship at GP, WSB or BSB so I don't understand what intrinsic value he thinks it...
After 3 1/2 sessions at Brands on Thursday, there is slightly less than an egg cup full of very clean Motul 7100 in the catch tray. It is my first...
What bits did you get, slipper centre and outer cage ? If is of standard construction as in not 48 tooth, your stock plates fit BUT in a different...
We were watching FP2 and the commentators said that they would be back for the next round. Andy
