Separate names with a comma.
the starter jet is ok at 70 but as AL says if the two main jets are 120 or 128 they are too small. Even the 350SS ran 127.5 main jets. More and...
I think you are wise overall Rob and thanks for letting it run this long - the traffic could easily get out of hand if left.
[IMG]changed your diet lately E.T.?
Glad that you posted Jerry - it needed to be done.
what time did you leave for Exeter Tony? 3 of us went to the meet near Salisbury that morning! I got carb icing a few times.
I have no doubt that a Baines exchange tank would be a sturdy job but tanks also turn up secondhand for around £60 or more if tip top. If they are...
This is an unusual one for sure, and the feedback is helping. So closed-down valve clearance aside, it sounds like it has to be fuel if spark on...
am loving the 'rose coloured glasses plus hindsight' aspect of this thread :biggrin:
now you told us that it only cuts out when it's warmed up, have you tried rechecking to see that you have a spark on that cylinder? - just have a...
this is salt water though :- IMG_2690 | Flickr - Photo Sharing!
repeat this thread in 'Bikes for sale' fullchatter, you're bound to get some response. You probably know - either check belts (particularly due to...
Triumph T90
as said, best confirm what's wrong first and the good news is that if it is a closed down shim then you can reduce the size of the existing one by...
clockwise is correct and sadly does mean something is damaged if it doesn't stop turning. You should also get an ignition light, an oil pressure...
Hilltop's 'Bushtucker Trial' all day breakfast was ok I guess, but even I had to leave the Koala's digeridoo
as you have already changed both pick-ups (and although you would tend to think the fault was electrical due to restored performance when you fit...
late 750 (like yours) are 46 mm, early (certainly looks like the pair on E-Bay) are 41.6 mm. An odd size but I checked twice (standard wheel is 21...
I have both types Dave but never got round to comparing. If you don't have any luck on 'that other site' then I will measure in the morning. One...
you can blank inlet/outlet completely if you like.
like your topic Dave - total removal in a cold climate could even be a good thing as far as engine longevity is concerned. A fully warmed up motor...
