Separate names with a comma.
That is the Bluetooth module and uses a 3 pin connector. You are looking for similar connector with 2 pins/wires which should have a short length...
Never been charged for fitting accessories when ordered with a new bike, by Ducati Aylesbury.
It's located under the "Ducati" cover on the left hand side. See picture in previous thread.
I've come to the conclusion that the 36mm spanner I purchased for chain adjustment when on tour just won't be up to the job and in any case is too...
Agreed however they do need to enabled by your dealer. In fact I've got a set I took off my 1200 DVT which should fit a 1260 if your interested -...
I might be tempted to go for a ride on a nice day if the roads are dry however once salt goes on the road that's it until at least March.
I changed the chain and sprockets myself but I do have a good impact driver (DeWalt DCF899, 950 Nm max.) and a torque wrench (Britool, 70 to 330...
All that and you can burn through back tyres in record time :-) Well worth the time and money - enjoy :-)
There are two separate things to consider: Permitted development, where planning permission is not required, e.g. Outbuildings are considered to...
There seems to be a market for a CAN bus enabled mobile phone app that reads the motorcycle's revs, throttle opening etc. and plays an appropriate...
+1 for using ceramic brake grease which I now use instead of copperslip to elimination any galvanic corrasion issues.
The 1200 S GT model introduced in 2013 has the "additional spot lights" fitted as standard and therefore all the part numbers are available from...
The 36/30 sockets I've found so far are:...
@Veetwin - I've got the same problem I brought a couple of 36 mm bi-hex sockets (1/2" sq. drive, deep, impact + 3/4" sq. drive) plus a 36mm...
Just checked the balance weights on my cast wheels (with TPMS sensors installed). The front wheel has 75g directly opposite the valve and the rear...
I had TPMS sensors fitted into my cast wheels and there are loads of balance weights. Down to the dealer to install the sensors and then rebalance...
Just replaced my Interphone Urban headsets after 5 years. The speaker/mic connection on one failed (my fault) and the battery on the other one...
I've just noticed that Ducati now publish the installation instructions for most of the Multistrada V4 accessories as a PDF attachment. The link...
Agreed. You'd also need to have a new set ready for when you get home :-)
It looks like the same mounting plate that is included in the plastic top case kit, complete with the 4 screws: [ATTACH]
