Separate names with a comma.
I think used engine oil would be too thin for the Nemo - they recommend using 80/90 Gear oil and a litre of that lasts a long time!
Old thread updated after a query from Nigel about mounting the oil dispenser pipe, in the original position on the lower chain run it did work for...
Just did the same with a Denali Mini SB, a little bracket bending but fitted pretty easily and MUCH louder than the OE pip squeak horn.
Does that include the oil from the old Oil Filter itself? Did the same recently on a Monster and there was about 1/2 ltr in the removed filter unit.
Talking to Dealer a while ago about belts v chains etc. the comments were "where have you seen belts or shafts in competitive bike racing (apart...
The top Box racks will also swap over from DVT to 1260, the only part that didn't was the Rad guard from Evotech - (IIRC) - had to wait for a new...
I have a Touratech Comfort seat on my 1260 that came form my previous 1200DVT and is almost 5 years old, and it seemed to be getting harder and...
For me the Jamie spacers work well with a Ducati touring screen at its lowest setting. Quieter and good airflow on a recent 28C+ Germany trip.
Like these ? https://ducabike.com/ducatiparts/en/multistrada-1200-my-2015/1888-spm01-mts-protection-handguards.html
Most I have ever put in the 1260 is 18 litres (UK ones) and that was when it was on red and 5 miles showing to empty. Be aware that the fuel...
Not had this happen on the 1260 at all. Odd really (in a good way) as it did happen on previous Multis.
Maybe the Harq Multi will fix it :astonished: https://www.buff.com/gb/booney-hat-buff-harq-multi.html?nosto=nosto-page-category2
Its the constant speed that uses oil in my experience. For example - Recent 1700m trip - Day one on the way out was a fast constant throttle...
- Sitting on the bike its on the LHS, need to remove the LHS Black Cover that runs from the tank to the nose, two bolts and slide forward (after...
Not tried to move the stems but the glass in the mirror casing has some adjustment - need to be careful and push on the edges
My top box is also 10 years old and on it 4th Multi ! It did rattle a bit and I thought it had worn the two lugs at the front. Today I took the...
There is no clear cut answer to this as there are so many variables but having recently fitted the ICONIC screen spacers to my multi 1260S touring...
On the 1260 The front Tyre Valve needs to be rotated about 45 degrees to clear the caliper for the TPMS sensor to clear the caliper. On the rear...
As before I have one fitted and I have an Evotech Rad guard as well, they do stop "some" of the crap going onto the front cylinder head. Do you...
As it happened yesterday at Thruxton I was paired with another Multi rider on a 2012 single spark 1200 Pikes Peak Multi with me on a 1260S both...
